PREMIUM GEL is a 200 mesh, 90 bbl yield sodium bentonite for freshwater drilling, slurry walls, and tunnel boring.

Soda Ash

Soda Ash is used to raise the pH of make-up water for Polymer and Bentonite drilling fluids by precipitating out hardness in the mix water.

APT 137 Rock Drill
Weight38 lbs17 kg
Air Consumption90 cfm42 l/s
Blows per minute23002300
SM-20

The SM-20 is a multipurpose hydraulic drilling rig. Its modular design is engineered for the execution of micropiles, tie-backs, anchors, jet-grouting, drains, water wells.

Operating Weight (approximate)

46,297 lbs

21,000 kg

Max Torque

15,887 ft-lbs

2,154 daNm

Clamp Range

2.4 - 12.6 in

60 - 320 mm

Sodium Bicarbonate is a neutral pH /buffer and has many uses.

HIGH YIELD BENTONITE FOR FOUNDATION DRILLING

Sodium Hydroxide is a granular pH regulator and is an essential component when using the SHORE PAC foundation drilling slurry.

ACCU-VIS

ACCU-VIS is a liquid drilling fluid polymer with no shear required.

Let us design a slurry system program for your wet shaft drilling utilizing CETCO’s SHORE PAC polymer slurry. 

APT 155 Rock Drill
  • 3 drilling speeds
  • Replaceable piston stem bearing
  • Built-in automatic oiler
  • Available wet or dry
  • Counter clockwise rotation
  • Rubber handle grips

Weight

61 lbs

PSI

90 psi

Air Consumption

110 - 120 cfm

APT 115 Rock Drill

Features:
• Stop-rotation feature
• Built-in automatic oiler
• Latch type retainer
• Lightweight aluminum cast handle

Weight

19 lbs

PSI

90 psi

Air Consumption

32 - 36 cfm

APT 137 Rock Drill

• 4 drilling speeds
• Replaceable piston stem bearing
• Available in wet or dry models
• Counter clockwise rotation
• Rubber handle grips

Weight

38 lbs

PSI

90 psi

Air Consumption

85 - 90 cfm

CP-0014 Rock Drill

• Driving or setting masonry anchors and drilling holes in concrete, bricks or rock
• Used for chipping, scarifying, scaling and cleaning welds
• Superior drilling rates
• Greater drilling capacity compared to plug hole drills
• Designed for production drilling of small holes

Weight

15 lbs

PSI

90

Air Consumption

32 cfm

CP 0009 Rock Drill

• Driving or setting masonry anchors and drilling holes in concrete, bircks or rock
• As a hammer, used for chipping, scarifying, scaling and cleaning welds
• Superior drilling rates
• Greater drilling capacity compared to plug hole drills
• Designed for production drilling of small holes

Weight

8 lbs

PSI

90 psi

Air Consumption

20 cfm

Medium Chips

Medium chips are a 3/8” granular fluid loss additive.  They are a natural sodium bentonite screened to 3/8” in size.

APT 109 Rock Drill

• Right-hand rotation
• Lightweight, aluminum cast, D-style handle
• Inside trigger for better control and safety
• Deep case hardened alloy steel cylinder

Weight

9 lbs

PSI

90 psi

Air Consumption

19 - 21 cfm

De-Chlor

De-Chlor is a dechlorination additive that neutralizes chlorine in municipal water.

Cetco Crumbles

CETCO Crumbles is an 8-20 mesh coarse granular bentonite fluid loss additive composed of polymer-free, dried bentonite.

INSTA-CLEAR DRY is designed to lower pH, break emulsions, and remove high levels of suspended solids. It is very effective in flocculating a shaft prior to sand content checks if needed.

SLURRY BUSTER DRY is an industrial grade oxidizing agent used to breakdown SHORE PAC polymer slurry. Composed of 65% active ingredients, SLURRY BUSTER DRY will not freeze.

The TD25+ is a low overhead, Takeuchi mini excavator mounted mini piling rig capable of drilling 35” diameter piles to depths of 42ft.

Torque

18,439 ft lbs

Base Carrier

Takeuchi TB260/Excavator

Max Drill Depth

59 ft

The TC25+ is a low overhead, radio remote controlled, mini piling rig capable of drilling 39” diameter piles to depths of 59ft.

Specifications

Torque

25,814 ft lbs

Base Carrier

Techno Drill/Radio Remote

Max Drill Depth

68.9 ft

The TD35+ is a very powerful mini piling rig mounted on a Takeuchi TB290 excavator.  Designed with over 25,000 ft, lbs. of torque enabling drilling depths of up to 68ft.

Specifications

Torque

25,814 ft lbs

Base Carrier

Takeuchi TB290/Excavator

Max Drill Depth

68.9 ft

Micropile_Soilmec_SM14

Soilmec SM-14 is a multipurpose drilling rig. Its modular design is engineered for the execution of:
Micropiles, Tie-backs, Jet-grouting, Drain, Water wells.

Operating Weight (approximate)

31,526 lbs

14,300 kg

Max Torque

10,031 ft-lbs

1,360 daNm

Clamp Range

2 - 16 in

50 - 415 mm

Pages