The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 78,000 ft-lbs | 106 kNm |
Hammer Weight | 27,600 lbs | 12,519 kgm |
Blow Rate | 36 bpm | 36 bpm |
The ChemGrout model CG540/2C4/A is a skid mounted, air powered grout machine.
Used for: waterproofing, spraying, post tensioning, machine base, self leveling floor underlayments, resurfacing deteriorated concrete, and more...
The ChemGrout model CG-542 is a skid mounted air powered grout plant.
Used for: rock bolts, rock anchors, cable grouting, cable stays, waterproofing, rock and soil nails.
Tsurumi Agitator Pump KTD Series is a cast iron made, heavy-duty slurry pump employing the KTZ Series as the base.
ChemGrout paddle mixers are equipped with a vertical shaft and feature specially designed blades and baffles.
The blades and baffles develop a high shear mixing action, insuring a rapid and thorough mix.
The ChemGrout CG-550 Thin Mix series includes both skid and trailer mounted grouting equipment.
Used for: Soil & rock, void filling, waterproofing, anchor, cable, rock bolts, encasements, and more...
The ICE 14-23 has a patented design that combines high frequency with a lower suspended weight for maximum driving force.
Eccentric Moment | 1,400 in-lbs | 16 kgm |
Driving Force | 74 tons | 660 kN |
Suspended Weight | 5,280 lbs | 2,395 kg |
KTZ pumps are designed to withstand the most demanding conditions, including those found in the highly abrasive waters of construction, aggregate, and mining dewatering.
The ChemGrout CG-600 colloidal series are heavy duty, high volume colloidal mixing grout plants.
Used for: Tunnels, mining, dam foundations, soil permeation, soil & rock grouting, microfine cements, and more...
Tsurumi's LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods.
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 132,240 ft-lbs | 179 kNm |
Hammer Weight | 42,100 lbs | 19,096 kgm |
Blow Rate | 34 bpm | 34 bpm |
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 176,320 ft-lbs | 239 kNm |
Hammer Weight | 47,170 lbs | 21,396 kgm |
Blow Rate | 31 bpm | 31 bpm |
The ChemGrout CGC4 is a skid mounted, Size 4, Open-Throat Progressive Cavity Grout Pump.
Used for: Soil & rock, void filling, waterproofing, anchor, cable, rock bolts, encasements, marine/underwater, well casing, abandon shafts/holes, and more...
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 220,440 ft-lbs | 299 kNm |
Hammer Weight | 57,530 lbs | 26,095 kgm |
Blow Rate | 29 bpm | 29 bpm |
The ChemGrout CG-450/2L4/EH is a custom designed, skid or wheel mounted, high shear injection system.
Designed for vacuum grouting of post tensioned cables ducts or small injection projects.
Used for: Heavy-duty frame and lifting lug stand up to the rugged conditions of post tension grouting.
The ChemGrout CG-C6 is a perfect solution when pumping viscous, abrasive or solid laden materials.
Used for: doil & rock, void filling, waterproofing, anchor, cable, rock bolts, encasements, marine/underwater, well casing, abandon shafts/holes, and more...
The new SM-5 by Puntel is a compact drill rig weighting 5.6 tons. It is available both with a combined kinematic mechanism.
Operating Weight (approximate) | 12,345 lbs | 5,600 kg |
Max Torque | 14,750 ft-lbs | 2,000 daNm |
Clamp Range | 1.9 - 8.6 in | 50 - 220 mm |
The SM-9 is a multipurpose drilling rig. Its modular design is engineered for the execution of: micropiles, tie-backs, jet-grouting, coring, drain, water wells.
Operating Weight (approximate) | 20,613 - 21,054 lbs | 9,350 - 9,550 kg |
Max Torque | 19,914 ft-lbs | 2,700 daNm |
Clamp Range | 2.4 - 12.6 in | 60 - 320 mm |
The SM-20 is a multipurpose hydraulic drilling rig. Its modular design is engineered for the execution of micropiles, tie-backs, anchors, jet-grouting, drains, water wells.
Operating Weight (approximate) | 46,297 lbs | 21,000 kg |
Max Torque | 15,887 ft-lbs | 2,154 daNm |
Clamp Range | 2.4 - 12.6 in | 60 - 320 mm |
Soilmec SM-17 is a multipurpose drilling rig developed from the fusion of TREVI GROUP job-site experience and SOILMEC technological research.
Its modular design is engineered for the execution of: Micropiles, Tie-backs, Anchors, Jet Grouting and Mini-piles.
Operating Weight (approximate) | 37,478 - 39,600 lbs | 15,422 - 17,237 kg |
Max Torque | 18,048 ft-lbs | 2,447 daNm |
Clamp Range | 2 - 16 in | 60 - 415 mm |