The VANCS series of pumps offer automatic or manual operation and feature the most advanced material composition available in submersible pumps.
Series | HU | HU | HUL | HUL | H5U | H5U | HU40 | HU40 | HUL40 | HUL40 |
Line Pull | 2,500 lbs | 1,134 kg | 2,500 lbs | 1,134 kg | 3,000 lbs | 1,361 kg | 4,000 lbs | 1,814 kg | 4,000 lbs | 1,814 kg |
Weight w/o Wire Rope | 490 lbs | 222 kg | 562 lbs | 255 kg | 525 lbs | 258 kg | 525 lbs | 238 kg | 600 lbs | 272 kg |
PSI (Bar) | 90 | 6.2 bar | 90 | 6.2 bar | 90 | 6.2 bar | 90 | 6.2 bar | 90 | 6.2 bar |
CFM | 350 | 594 m3/h | 350 | 594 m3/h | 350 | 594 m3/h | 350 | 594 m3/h | 350 | 594 m3/h |
The new SM-5 by Puntel is a compact drill rig weighting 5.6 tons. It is available both with a combined kinematic mechanism.
Operating Weight (approximate) | 12,345 lbs | 5,600 kg |
Max Torque | 14,750 ft-lbs | 2,000 daNm |
Clamp Range | 1.9 - 8.6 in | 50 - 220 mm |
ChemGrout paddle mixers are equipped with a vertical shaft and feature specially designed blades and baffles.
The blades and baffles develop a high shear mixing action, insuring a rapid and thorough mix.
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 54 lbs | 24.5 kg | 54 lbs | 24.5 kg |
Chuck Size (std.) | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm |
Operating Pressure | 90 psi | 6.2 bar | 90 psi | 6.2 bar |
Air Consumption (minimum) | 100 cfm | 2.8 m3/min | 100 cfm | 2.8 m3/min |
The cast iron construction of our KRS series extends pump life by preventing premature wear and failure from the abrasive materials found in mining, aggregate, and construction applications.
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 54 lbs | 24.5 kg | 54 lbs | 24.5 kg |
Chuck Size (std.) | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm |
Operating Pressure | 90 psi | 6.2 bar | 90 psi | 6.2 bar |
Air Consumption (minimum) | 400 cfm | 11.2 m3/min | 400 cfm | 11.2 m3/min |
Tsurumi corrosion resistant pumps are available in 316 or 304 stainless steel (SFQ Series and SQ Series) as well as titanium (TM Series). Featuring semi-vortex, vortex, and semi-open impellers, our solidly engineered pumps can endure the corrosive forces of your toughest applications.
Soilmec SM-14 is a multipurpose drilling rig. Its modular design is engineered for the execution of:
Micropiles, Tie-backs, Jet-grouting, Drain, Water wells.
Operating Weight (approximate) | 31,526 lbs | 14,300 kg |
Max Torque | 10,031 ft-lbs | 1,360 daNm |
Clamp Range | 2 - 16 in | 50 - 415 mm |
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 54 lbs | 24.5 kg | 54 lbs | 24.5 kg |
Chuck Size (std.) | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm |
Operating Pressure | 90 psi | 6.2 bar | 90 psi | 6.2 bar |
Air Consumption (minimum) | 100 cfm | 2.8 m3/min | 100 cfm | 2.8 m3/min |
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 54 lbs | 24.5 kg | 54 lbs | 24.5 kg |
Chuck Size (std.) | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm |
Operating Pressure | 90 psi | 6.2 bar | 90 psi | 6.2 bar |
Air Consumption (minimum) | 500 cfm | 14.0 m3/min | 500 cfm | 14.0 m3/min |
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 54 lbs | 24.5 kg | 54 lbs | 24.5 kg |
Chuck Size (std.) | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm |
Operating Pressure | 90 psi | 6.2 bar | 90 psi | 6.2 bar |
Air Consumption (minimum) | 100 cfm | 2.8 m3/min | 100 cfm | 2.8 m3/min |
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 54 lbs | 24.5 kg | 54 lbs | 24.5 kg |
Chuck Size (std.) | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm |
Operating Pressure | 90 psi | 6.2 bar | 90 psi | 6.2 bar |
Air Consumption (minimum) | 200 cfm | 5.6 m3/min | 200 cfm | 5.6 m3/min |
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 54 lbs | 24.5 kg | 54 lbs | 24.5 kg |
Chuck Size (std.) | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm |
Operating Pressure | 90 psi | 6.2 bar | 90 psi | 6.2 bar |
Air Consumption (minimum) | 300 cfm | 8.4 m3/min | 300 cfm | 8.4 m3/min |
ICE 44B has the highest frequency and driving force in its class.
Eccentric Moment | 4,400 in-lbs | 51 kgm |
Driving Force | 207 tons | 1,844 kN |
Suspended Weight | 15,365 lbs | 6,970 kg |
All BAUER-Pileco helmets are made from quality cast carbon steel.
The cushion receptacles and pile insert receptacles are machined flat for maximum energy transfer.
The U-Lead guiding is machined to warrant the required guiding tolerance.
Tsurumi's LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods.
Series | K6U | K6U | K6UL | K6UL | K6UL36 | K6UL36 |
Line Pull | 10,000 lbs | 4,536 kg | 10,000 lbs | 4,536 kg | 10,000 lbs | 4,536 kg |
Weight w/o Wire Rope | 1,315 lbs | 596 kg | 1,550 lbs | 703 kg | 2,050 lbs | 930 kg |
PSI (Bar) | 90 | 6.2 bar | 90 | 6.2 bar | 90 | 6.2 bar |
CFM | 375 | 637 m3/h | 375 | 637 m3/h | 375 | 637 m3/h |
Series | K4U | K4U | K5U | K5U |
Line Pull | 4,000 lbs | 1,814 kg | 5,000 lbs | 2,268 kg |
Weight w/o Wire Rope | 850 lbs | 386 kg | 890 lbs | 404 kg |
PSI (Bar) | 90 | 6.2 bar | 90 | 6.2 bar |
CFM | 350 | 594 m3/h | 350 | 594 m3/h |
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 54 lbs | 24.5 kg | 54 lbs | 24.5 kg |
Chuck Size (std.) | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm |
Operating Pressure | 90 psi | 6.2 bar | 90 psi | 6.2 bar |
Air Consumption (minimum) | 100 cfm | 2.8 m3/min | 100 cfm | 2.8 m3/min |